Having a party with my AC AT MIDNIGHT

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • aviator
    Administrator
    • Oct 2024
    • 2258

    Having a party with my AC AT MIDNIGHT

    Wake up to go pee and hear water dripping, WTF? Go open the AC closet and the pan has a lot of water, shit I to got all the water out and I stuck my finger on the drain pipe and it’s full of water, so go out to the side of the house, unwind about 100’ of hose, bring the end into the house and flush the drain, of course a brand new filter got ruined so go to the garage and get a new one, replace it and dry everything out. Can’t fall sleep now, wife was 30’ away never even heard a thing. A fun night and there was no alcohol or sex involved.
    Sometimes I wish I had a Harry Potter's wand and make people go up into smoke.
  • Pogo
    Mystic Knight of the sea
    • Oct 2024
    • 640

    #2
    My AC drains into the sewer.
    We have met the enemy and he is us.

    Comment

    • dinkydow
      Moderator
      • Oct 2024
      • 736

      #3
      Mine drains into a sump where the excess water collected gets pumped out to the backyard.

      Comment

      • 4thIDvet
        Slug
        • Oct 2024
        • 1755

        #4
        Mine the little bit their is waters the front lawn.

        Comment

        • aviator
          Administrator
          • Oct 2024
          • 2258

          #5
          Mine has a long run and drains on to the rear of the house on the grass area but as much as it runs down here it gets this slime that clogs the p trap at the end and needs to be flushed about once a year, but I wish it would have clogged at a different time.. Sometimes I pour Chlorine down the pipe but haven’t done it in a while.
          Sometimes I wish I had a Harry Potter's wand and make people go up into smoke.

          Comment

          • Sanders
            Moderator
            • Oct 2024
            • 1562

            #6
            First world problems.

            Here I sit with over a foot of snow outside and more on the way. If my furnace quits working, I strike a match and light the wood stove.

            Comment

            • rto
              Moderator
              • Oct 2024
              • 826

              #7
              I pour a cup of vinegar into the a/c drain access several times a year to prevent clogging. I was using bleach but my a/c guy told me to use vinegar. It works.

              Comment

              • Pogo
                Mystic Knight of the sea
                • Oct 2024
                • 640

                #8
                I seldom ude my AC. When the temperaturw gets up in the 90s and no breeze I'll turn it on.

                But it's heating time now. Perfect weather.
                We have met the enemy and he is us.

                Comment

                • aviator
                  Administrator
                  • Oct 2024
                  • 2258

                  #9
                  Originally posted by rto
                  I pour a cup of vinegar into the a/c drain access several times a year to prevent clogging. I was using bleach but my a/c guy told me to use vinegar. It works.
                  I'll try that. I keep a small funnel next to the airhandler just for that purpose.
                  Sometimes I wish I had a Harry Potter's wand and make people go up into smoke.

                  Comment

                  • Pogo
                    Mystic Knight of the sea
                    • Oct 2024
                    • 640

                    #10
                    I pour some bleach in mine a couple times a year to stop bacteria from growing.
                    We have met the enemy and he is us.

                    Comment

                    • 44044
                      Slug
                      • Oct 2024
                      • 717

                      #11
                      Vinegar…I’ll try that…

                      Comment

                      • aviator
                        Administrator
                        • Oct 2024
                        • 2258

                        #12
                        Vinegar is less corrosive on the unit.
                        Sometimes I wish I had a Harry Potter's wand and make people go up into smoke.

                        Comment

                        • 4thIDvet
                          Slug
                          • Oct 2024
                          • 1755

                          #13
                          Originally posted by 44044
                          Vinegar…I’ll try that…
                          Vinegar the magic liquid. I use it to get rid of rust on metal parts on the old jeep were restoring. Put the metal part in a container of vinegar soak for a few days and the part will come out looking brand new. Paint companies are all coming out with primers that mix with and prevent rust give it a coat of that primer and no harsh chemicals and your done.

                          If you're looking for a multitasking cleaning product you can use for everything from whitening laundry and washing windows to driving out pests and sanitizing surfaces, it's time to stock up on distilled white vinegar

                          26 Smart (and Sustainable) Uses for Vinegar Around the House

                          26 Household Uses for Vinegar, From Cleaning to Deodorizing​​

                          Galvanized metals?

                          White vinegar is effective and non-toxic which is much safer to use rather than an industrial solvent. All you need to do is apply the vinegar on a clean rag and then simply wipe down the galvanized surface. The great thing about vinegar is that it has an acidity that will react with the metal, promoting pain adhesion.

                          How to Paint Galvanized Steel in 4 Easy Steps - Independent Metal Strap​​

                          Comment

                          • 44044
                            Slug
                            • Oct 2024
                            • 717

                            #14
                            Metal that has been on fire (had the

                            paint burned off) after you sand it

                            down, wipe it with White Vinegar

                            and the new paint will adhere better

                            Comment

                            • aviator
                              Administrator
                              • Oct 2024
                              • 2258

                              #15
                              It’s a pretty strong acid with a Ph of 2-3, if you want to get a rusted tool cleaned just dip it in vinegar for a couple days.
                              Sometimes I wish I had a Harry Potter's wand and make people go up into smoke.

                              Comment

                              Working...